Section: 400×400 mm, this spigot truss is constructed of main tube: Ø50×3 mm, end tube: Ø50×3 mm and four-sided diagonal brace tube: Ø30×2mm. With suitable design, this truss can be used for roof structures with spans of approximately 8-15m.(Actual span depends on the specific application and structual conditions). It provides a good balance between structural capacity, weight and portability.

Section: 300×300 mm, main tube: Ø50×3 mm, vice tube: Ø50×2 mm, brace tube: Ø25×2 mm. Joint: 50×25×3 mm square tube with 2 internal ribs. Safe Working Load: 350 kg (15 m span, uniformly distributed)

Section: 400×600 mm, this spigot truss is constructed of main tube Ø50×3 mm, vice tube at endsØ50×3 mm,vice tubeØ50×2 mm, brace tubeØ25×2 mm, with Double-sided diagonal brace tube. With suitable design, this truss can be used for roof structures with spans of approximately 10-18m(Actual span depends on the specific application and structual conditions) . It provides a good balance between structural capacity, weight and portability.

Main Tube: Ø50×3 mm, Vice Tube: Ø50×2 mm, Brace Tube: Ø25×2 mm, Hole Diameter: 10 mm, Plate Thickness: 10 mm, Safe Working Load: 400 kg (14 m span, uniformly distributed)

This Scaffolding system is mainly made of Q195, Q235 and Q355 carbon steel (specific materials vary according to component length and surface treatment). The standard can be supplied in lengths of 1m, 1.5m and 2m, 1m and 1.5m standards adopted Ø48.3×3.0±0.3 mm Q235 carbon steel with black E-coat; the 2m version adopts Ø48.3×3.25 mm Q355 carbon steel with hot-dip galvanized and E-coat(2m version). The ledgers are available in lengths of 1.955m and 0.953m, it is constructed with Ø48.3×3.0±0.3 mm Q235 carbon steel. The diagonal brace is constructed with Ø42.7×2.5±0.3 mm Q195 carbon steel. All above scaffolding systems are manufactured and sold in compliance with JG/T 503-2016.